Waterproof Additive

Exoline® Aqua Stop B+



VARPOR AND WATERTIGHT PREPARATION OF PLASTERS


Exoline® Aqua Stop B+ is a nanotechnology-formulated (universal, hydrophobic, additive) 2.4 kg concentrated active ingredient.

For the formulation of high strength, hydraulically bonded, interior and exterior vapour - waterproofing and fire resistant renders.


Finished plaster components:

  • 25 kg - Portlant cement (32/II vagy 42/II) kompozit

  • 120 kg - Sand (0-0,5mm)

  • 2,4 kg - Exoline® Aqua Stop B+

  • Consumption: 15 - 16 kg dry mortar /m2/ cm

  • Water demand: approx. 34-38 litres

Benefits offered by the Exoline® product family. First and foremost, our products are compatible with all commercially available cement-based construction products, and they can be used to replace other systems, such as spreadable insulating materials, film sheets, heavy sheets and other technological solutions, which all increase the risk, cost and time of construction.

The dry mortar made from the additive has strong waterproof and water-repellent (hydrophobic) characteristics. Suitable for insulation against both positive and negative side water pressure. After mixing with water, the dry mortar is an excellent choice for the plastering of exterior and interior surfaces of brick, concrete, quarry stone, adobe and combined masonry.

Fields of application:

  • Water-tightness of older and newly-built buildings, residential buildings, industrial facilities, cellar walls, balconies, underground parking garages, tunnels, sewer vaults, sewer storage vaults, sewage reservoirs, water reservoirs, fire water reservoirs, recessed water tanks, bathrooms, showers, gas reservoirs, clarifying tanks, garden ponds, pools, inspection pits, pickling tanks, etc. Suitable for both new construction and subsequent repair.

Can be used independently based on our formula or mixed with the products of other manufacturers (including acclaimed brands), such as:

  • manual base plasters, machine-applied base plasters, plaster coatings, footing plasters, masonry mortars, pre-sprayers, etc.
  • construction adhesives, tile adhesives, Gres adhesives, Flex adhesives, EPS polystyrene adhesives, thermo adhesives, etc.
  • gypsum plasters, fillers and other cement-based powders

Product properties:

  • Plaster of hydraulic bonding for indoor and outdoor use.
  • It is supplied in ready-mixed form, and needs to be mixed only with water.
  • It is easy and quick to integrate.
  • Surfaces made with the use of Exoline® can be directly covered in tile cladding.
  • It is suitable for the application of plaster on the facades of new buildings and the follow-up repair works (insulation) of older buildings alike.

Composition: Exoline® additive. Contains aggregate to facilitate adhesion and other property enhancing additives:

  • Specific weight: 0.65l/kg
  • Specific surface: 25m2/g
  • Placement time: approx. 2 hours
  • Drying time: sets in approx. 24 hours at 20°C depending on weather conditions
  • Physical state: powder
  • Colour: grey